3.
Place an espresso cup (yourself cup) on removable shelf.
4.
Then connecting the appliance to power supply source.
Make sure the steam control knob is on the “OFF” or
“0” position.
5.
Press the “Coffee / ON/OFF” and press the “Coffee” switch, when there is water
flowing out and close the
pump (press the “coffee” switch), and wait for a moment, the coffee maker begins to be heated.
Making
Espresso Coffee
1.
Remove the funnel by turning it in clockwise, .Add ground coffee to steel mesh with measuring spoon, a
spoon ground coffee power can make about a cup of top-grade coffee, then press the ground coffee powder
tightly with the tamper.
2.
Set steel mesh into metal funnel, pull the press bar backward, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the “Insert” position and release the
press bar, and you can fix them into coffee maker firmly through turn it anticlockw
ise until it is at the “
lock
”
position. (See figure 1).
3.
Pour out the hot water in the cup. Then place the hot cup (yourself cup) on removable shelf.
4.
At the time, the blue lamp is illuminated, if the blue lamp is extinguished, wait for a moment, once the blue
lamp is illuminated, and you should press the coffee/hot water selector on the “1” position, waiting for a
moment, there will be coffee flowing out.
Note:
During operation, if the blue indicator is extinguished, you must close the pump and stop to make
espresso coffee. After a few seconds, if the blue lamp is illuminated again, you can make espresso coffee
continued by pressing coffee/hot water selector to “1” position, the blue lamp
is cycle ON and OFF to
maintain the water temperature is hot enough.
5.
Yo
u should press coffee/hot water selector to “0” position manually when desired coffee is obtained or the
colour of coffee changes weak obviously, the red and blue indicator go out and the coffee maker stops
working, your coffee is ready now.
WARNING:
Do not leave the coffee maker unattended during making the coffee, as you need operate
manually sometimes!
6.
After finishing making the coffee, you can take the metal funnel out through turn anticlockwise, and then
pour the coffee residue out with the steel mesh pressed by press bar.
7.
Let them cool down completely, then rinse under running water.
Frothing Milk / Making Cappuccino
You get a cup of cappuccino when you top up a cup of espresso with frothing milk.
Method:
1.
Prepare espresso first with
container big enough according to the part “Making Espresso Coffee”, make sure
that the steam control knob is at the “OFF” or “0” position.
2.
Press the steam switch to the
“1”
position, waiting for until the blue indicator is illuminated.
Note:
During operation, if the blue indicator is extinguished, you should turn the steam control knob to
anti-clockwise direction.
3.
Fill a jug with about 100 grams of milk for each cappuccino to be prepared, you are recommended to use
whole milk at refrigerator temperature (not hot!).
Note:
In choosing the size of jug, it is recommend the diameter is not less than 70±5mm, and bear in mind
that the milk increases in volume by 2 times, make sure the height of jug is enough.
4.
Turn the steam control knob slowly in anti-clockwise, steam will come out from the frothing device.
F
i
g
.
1
