13. ON/OFF BUTTON
14. 1CUP BUTTON
15. 2CUP BUTTON
16. STEAM BUTTON
HOW TO
OPERATION
SETTING UP & PRE-HEAT PROGRAM
1.Remove the water tank (1) and fill with water to the indicated MAX line. Put the water tank onto
the machine, ensure that the drip tray is correctly positioned on the machine.
2.Plug the power cord into the socket. All the buttons will flash for 2 seconds, after all the buttons
off, the machine is ready to use.
Note: For the first time use: (it will not be prompted after 1st startup, there is no water
inside the heating body of the new machine, so it needs to refill water into the heater in
order to prevent dry burning), press the “on/off” button, all the LED lights will flash and the
machine will buzzer warning, press any button, the buzzer warning will stop.
3.Press the “on/off” button (13), the buttons (1cup, 2 cup) will flash at the same time. When the
pre-heat program is finished, “1 cup” & “2 cup” buttons will be lighting.
USING GROUND COFFEE
Select the appropriate sized Using the measuring spoon With the other end of the
filter (4/5) depending (3), measure out one level
measuring spoon, ‘tamp’ the
on whether you are making spoon per serving into the coffee grounds. You are
one espresso, a double or filter. Use 2 level spoons aiming for a firm but not
two
singles. Make sure it’s dry. if using the 2 cup filter. too tightly packed filter.
