Spraying:
Press the spraying button, steam will be sprayed out from the spraying
nozzle. At that time, you should keep enough water in the water tank.
Steam ironing:
1. Use steam ironing, turn the steam control to minimum position and set
the temperature control at the “.”, “..” or “…” position.
2. After the indicator goes out, turn the steam control to the suitable
position, steam will be sprayed, ironing can start.
Bursting steam:
Set the temperature control at the “…” position, then press down the bursting
steam button, the base plate will spray out bursting steam.
Dry ironing:
Turn the steam control to minimum position, set the temperature control to the
suitable position, you can dry ironing.
Self-cleaning:
Set the temperature control to the maximum position, press the self-clean
button for about 1 minute, strong steam will be sprayed to clean the steam
chamber. Use the function once every two weeks
Anti-drip:
This iron is equipped with a drip stop function: the iron automatically stops
steaming when the temperature is too low to prevent water from dripping out
of the soleplate.
Anti-calc:
The Anti-calc function filtrate the minerals from the water to prevent mineral
residue build up at the steam chamber.
Automatic shut off:
If the iron is switched on and not moved for a period of 8 minutes while
standing on its heel or 30 seconds while standing on the soleplate, an internal
safety feature will switch the iron off and the auto-shut off indicator will blink.
Move the appliance sharply to switch it on again.
Storage:
After using, pull out the plug, pour out the remaining water, turn the steam
control to minimum, turn the temperature control to “min”, let the iron cool
down, put the iron on the safe and dry place vertically.
