General specifications:
- Operating voltage: 230VAC 50Hz.
- Maximum power of 1500W, resistive load.
- Power supply cable: 800mm
- Standby consumption: <0,5W.
- Electronic PID (Proportional Integral Derivative) control, triggered by a triac
Environnement:
- IP44 (control panel horizontal oriented after installation).
- Operating temperature: 0°C to +50°C.
- Class II, after installation under the responsability of the Installer
(according to EN60335-1).
TABLE OF CONTENTS
1 TECHNICAL SPECIFICATION
2 WARRANTY TERMS
3 DECLARATION BY MANUFACTURER 01
4 MOUNTING THE CONTROLLER 01
5 BINDING THE CONTROLLER WITH THE RF REMOTE CONTROL 02
6 ESTIMATED POWER CONSUMPTION DISPLAY:
SET THE RADIATOR POWER 03
7 OPERATION 04
1. DIAGRAM 04
2. POWER ON/STANDBY MODE 05
3. SELECTING THE OPERATING MODE 05
4. BOOST 07
5. ENERGY CONSUMPTION 08
6. KEYPAD LOCK/UNLOCK 09
7. WEEKLY AND DAILY PROGRAMMING 09
8. OPEN WINDOW DETECTION 14
9.INFORMATION ON PRIORITIES BETWEEN THE DIFFERENT MODES 15
The appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
Children being supervised not to play with the appliance.
1 TECHNICAL SPECIFICATION
2 WARRENTY TERMS
See www.vasco-group.eu
Kruishoefstraat 50
B-3650 Dilsen
T. +32 (0)89 79 04 11
F. +32 (0)89 79 05 00
