5
Vasa Kayak Ergometer User’s Manual
August 2015
SHORT
LONG
PART 1 - Assembly
1.3 ASSEMBLY STEPS
STEP 1. INSTALL REAR STANCHION
•
Insert the rear portion of the monorail into the head of the rear
stanchion sleeve with T-Slot facing up;
•
Insert the 2.5” bolt through stanchion/monorail holes;
•
Thread hex jam nut onto bolt;
•
Tighten with 5/32” allen wrench and 7/16” wrench;
•
Use 3/16” allen wrench to tighten set screw on stanchion sleeve.
NOTE: There are two set of holes on one end of the monorail. It does
NOT matter which end you insert into the rear stanchion as the second
set of holes are not used.
STEP 2. INSTALL MOUNTING BOLTS
•
Slide the head of the lock bolt (x4) into the T-slot on the bottom
front of the monorail.
STEP 3. INSTALL GOOSE NECK ONTO MONORAIL
•
Insert the short end of the goose neck bracket on the front end of
the monorail (keep long end above rail as shown);
•
Insert the 2.5” bolt through bracket/monorail holes;
•
Thread hex jam nut onto bolt;
•
Tighten with 5/32” allen wrench and 7/16” wrench;
•
Use 3/16” allen wrench to tighten set screw on bracket.
B
C
A
VIEW: BACK OF MONORAIL
VIEW: FRONT/END OF MONORAIL
Summary of Contents for KayakErg
Page 1: ......
