Varytec Hero Wash 715 HEX LED User Manual Download Page 9

Page: 9 / 60

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

CAUTION!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in minor injury if it

is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

General information

Hero Wash 715 HEX LED

moving head

Summary of Contents for Hero Wash 715 HEX LED





























































Search results

Summary of Contents for Hero Wash 715 HEX LED

Reviews:

Related manuals for Hero Wash 715 HEX LED

Brands by name

Popular brands

Varytec Hero Wash 715 HEX LED, User Manual

Search results

Summary of Contents for Hero Wash 715 HEX LED

Reviews:

Related manuals for Hero Wash 715 HEX LED

Brands by name

Popular brands