Varytec Hero Spot 60 User Manual Download Page 8

Page: 8 / 64

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

CAUTION!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in minor injury if it

is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

General notes

Hero Spot 60

moving head

Summary of Contents for Hero Spot 60

































































Search results

Summary of Contents for Hero Spot 60

Reviews:

Related manuals for Hero Spot 60

Brands by name

Popular brands

Varytec Hero Spot 60, User Manual

Search results

Summary of Contents for Hero Spot 60

Reviews:

Related manuals for Hero Spot 60

Brands by name

Popular brands