Varytec Easy Move LED XS, User Manual

Page: 12 / 21

12 / 21
8. Master/Slave linking the devices
1. Connect the 3-pole connector of the DMX cable with the 3-pole output the first device.
2. Then connect the output of the second device with the input of the third device.
3. Then go on by connecting the output of the each device with each input of the next device.
9. Setup
9.1. Orientation
The fixture can be used in every position, as long as enough ventilation is given.
9.2. Rigging
It is important that the ventilation doesn´t get limited. Only use fitting “C”- or “O”-clamps for hanging
devices. Loosen the clamps, adjust the angle of the devices and tighten the clamps again.
•
Select the place for rigging, that you are able to change the illuminant, respectively to maintain
the device.
•
Always use safety steel cables.
•
Never place the device at locations, where it is exposed to rain, high temperature changes or
humidity.