19.0 Panel Mount PC
486-0010-01-02
18
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is
“On”
.
Gate A20 Option
The default value is
“Fast”
.
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port
92 or chipset specific method.
Typematic Rate Setting
This item determines the typematic rate of the keyboard. The default value is
“Disabled”
.
Enabled
Enable typematic rate and typematic delay
programming.
Disabled
Disable typematic rate and typematic delay
programming. The system BIOS will use default value
of these 2 items, controlled by keyboard.
Typematic Rate (Chars/Sec)
This option refers to character numbers typed per second by the keyboard. The default value is
“6”
.
6
6 characters per second
8
8 characters per second
10
10 characters per second
12
12 characters per second
15
15 characters per second
20
20 characters per second
24
24 characters per second
30
30 characters per second
Typematic Delay (Msec)
This option defines how many milliseconds must elapse before a held-down key begins
generating repeat characters. The default
value is
“250”
.
250
250 msec
500
500 msec
750
750 msec
1000
1000 msec
Security Option
This item allows you to limit access to the system and Setup, or just to Setup. The default value is
“Setup”
.
System
If a wrong password is entered at the prompt, the system
will not boot, the access to Setup will be denied, either.
Setup
If a wrong password is entered at the prompt, the system
will boot, but the access to Setup will be denied.
NOTE
:
To disable the security, select PASSWORD SETTING at Main Menu and then you will be asked to
enter a password. Do not type anything, just press <Enter> and it will disable the security. Once the
security is disabled, the system will boot and you can enter Setup freely.
