manualshive.com logo in svg

VarTech Systems VTPC150P, User Manual

Share
Download
VarTech Systems VTPC150P User Manual Download Page 11

19.0 Panel Mount PC 

 

 486-0010-01-02 

11

 

Getting Help 

Main Menu 

The online description of the highlighted setup function is displayed at the bottom of the screen. 

Status Page Setup Menu/Option Page Setup Menu 

Press <F1> to pop out a small Help window that provides the description of using appropriate keys 
and possible selections for highlighted items. Press <F1> or

 

<Esc> to exit the Help Window. 

 
 

The Main Menu 

Once you enter the Award BIOS CMOS Setup Utility, the Main Menu appears on the screen. In the 
Main Menu, there are several Setup functions and a couple of Exit options for your selection. Use 
arrow keys to select the Setup Page you intend to configure then press <Enter> to accept or enter its 
sub-menu. 

 

NOTE:  If your computer cannot boot after making and saving system changes with Setup, the Award BIOS will reset 

your system to the CMOS default settings via its built-in override feature. 

It is strongly recommended that you should avoid changing the chipset’s defaults. Both Award and your 
system manufacturer have carefully set up these defaults that provide the best performance and 
reliability.  

 
 
 
 
 
 
 
 
 
 

Summary of Contents for VTPC150P











































Reviews:

No comments

Brands by name

Popular brands

Load more brands