VarTech Systems VTPC104P User Manual Download

Page: 20 / 37

10.4 Panel Mount PC

486-0011-00-00

Disabled

This setting prevents hard disk drive power down
mode.

Standby

This option stops the hard disk drives from spinning
during a system standby.

Suspend

This option cuts the power to the hard disk drives
during a system suspend. This is the default setting.

Disabled

Set this value to prevent the computer system from
entering standby mode. This is the default setting.

1 Min

Set this value to allow the computer system to enter
standby mode after being inactive for 1 minute.

5 Min

Set this value to allow the computer system to enter
standby mode after being inactive for 5 minutes.

10 Min

Set this value to allow the computer system to enter
standby mode after being inactive for 10 minutes.

Disabled

This setting prevents the system from entering suspend
mode. This is the default setting.

1 Min

Set this value to allow the computer system to enter
suspend mode after being inactive for 1 minute.

5 Min

Set this value to allow the computer system to enter
suspend mode after being inactive for 5 minutes.

10 Min

Set this value to allow the computer system to enter
suspend mode after being inactive for 10 minutes.

Hard Disk Drive Power Down Mode

This option specifies the power conserving state that the hard disk drive enters
after the specified period of hard drive inactivity has expired

The default setting is

Suspend

Standby Time Out

This option specifies the length of time the system waits before it enters standby
mode. The default setting is

Disabled.

Suspend Time Out (Minute)

This option specifies the length of time the system waits before it enters
suspend mode. The default setting is

Disabled

Resume On Ring

This item enables or disables the function of Resume On
Ring, this resumes the system through incoming calls.

Summary of Contents for VTPC104P






































Search results

Summary of Contents for VTPC104P

Reviews:

Related manuals for VTPC104P

Brands by name

Popular brands

VarTech Systems VTPC104P, User Manual

Search results

Summary of Contents for VTPC104P

Reviews:

Related manuals for VTPC104P

Brands by name

Popular brands