manualshive.com logo in svg

VarTech Systems VT201CM, User Manual

Share
Download
VarTech Systems VT201CM User Manual Download Page 3

 

20.1” PowerVue User Guide                                                                                                                                                           150-055 

INTRODUCTION

INTRODUCTION

 

1 

1.1 

1 

Section 

UNPACKING 

Before unpacking, the shipping carton should be inspected for damage.  Then, the carton 
should be carefully opened and the monitor removed.  The monitor itself should be carefully  
inspected for shipping damage.  If damage has occurred, the shipping carton and all packing 
materi-als should be saved for possible inspection by the shipping company, and the shipping 
company and VarTech should be notified immediately.  

NOTE:

   

Please save the packaging for re-use in case the monitor should ever have to be shipped to a 
new location.  

CHECKING PACKAGE CONTENTS 

All monitors are supplied with a User’s Manual and with cables and other optional accessories as 
specified by the customer at the time of order.  The contents of the package should be checked 
against the packing list to ensure that all items are present. 

1.2 

Summary of Contents for VT201CM































Reviews:

No comments

Brands by name

Popular brands

Load more brands