VarTech Systems VT201CHC, User Manual

Page: 10 / 21

VT201CHC User Guide 150-060
The Geometry Menu
OSD Agent Description
Edge Adjustment
Adjusts Picture Size and Position Controls. The four “Edge”
controls shift each edge within available limits. Note that the
maximum available shift depends on the incoming video standard
and the display panel type, and may be restricted vertically. This
provides very flexible and easy to use image size an position
control.
Moire
N/A
Clock
Sets the total number of input pixels per line to correspond with the
input source, and will normally require adjustment for unusual
signals.
Phase
Adjusts the internal clock to sample each pixel as near as possible
to the centre. Phase will normally require adjustment for unusual
types of signal.
Input Select: Configures the preferred input selections.
(If a facility is not fitted, it will be displayed but not selectable.)
OSD Agent Description
Signal Type Priority Graphics-video
Video Priority Search
Order
CVBS -Y/C - Component
Y/C - CVBS - Component
Component - CVBS - Y/C
The Color Menu
OSD Agent Description
Video Inputs
Adjusts the contrast (video gain) and brightness (black level)
parameters.
Graphics Search
RGB-DVI Note: DVI not available
Component Video Type
RCB or YUV. Incorrect colors may be due to wrong selection here.
Computer Inputs-
Individual Color
Adjustments
Red, green and blue levels can be thought of as individual
brightness controls for each of red, green and blue. They should be
adjusted for the desired color balance and to minimize noise on low
intensity colors and greys. Color tints can be added as required.
3.3
Adjustment Procedure Cont.