VarTech Systems VT190P2, User Manual

Page: 13 / 25

13
VT190 DiamondVue/CrystalVue User’s Guide 150 ‐ 180
MOUNTING INSTRUCTIONS
SECTION 7
7.1 Panel Mount Procedure
Mechanical Drawings
Model Description Page(s)
VT190P2 19" DiamondVue/CrystalVue Panel Mount Drawing (Nema 4) 16, 17
VT190C2 19" DiamondVue/CrystalVue Open Frame Drawing 18, 19
VT190W2 19” DiamondVue/CrystalVue Wall/Vesa Mount Drawing 20
VT190R2 19” DiamondVue/CrystalVue Rack Mount Drawing 21
VT190PSS 19” DiamondVue/CrystalVue Panel Mount SS Drawing (Nema 4x) 22 ‐ 23
VT190M2 19” DiamondVue/CrystalVue Table Top Drawing 24
1. Cut and drill the panel (refer to panel mount drawing). Measurements are in inches.
2. If access to the side of the monitor is not available following installation, attach the power and video cables to the
side of the monitor at this time.
3. Install the monitor in the prepared cutout.
4. Install the lock nuts and washers, supplied with the monitor, behind the holes running along the sides and top/bottom
of the cutout in the panel. Extra lock nuts and washers are provided.