VT121 ColorVue Series User Guide
150-033
Cleaning
Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked)
with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the
screen surface to avoid scratching it with accumulated grit.
15
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
10
Section
Note:
The solvent should be applied only to the cloth, and not directly on the monitor screen.
Do not use paper products as they may scratch the surface. To minimize the risk of
abrasion, allow the screen to stand dry.
Special care should be taken when cleaning a touch screen or polycarbonate shield that is
installed over the screen. Abrasive and certain chemical cleaners can easily damage the
surface.
Never
use alcoholic or ammoniac cleaners to clean the polycarbonate shield or a touch
screen.
Replacing a Line Cord
To avoid shock and fire hazards, the monitor’s power cord should be replaced if the
insulation becomes broken or if it develops a loose internal connection.
Other Maintenance
Qualified service personnel should perform all maintenance, except for the power cord
replacement described above.
