VT121 ColorVue Series User Guide
150-033
OSD Functions
Symbol
Description
Function
RESOLUTION
Display the picture model.
AUTOTUNE &
RECALL
Autotune the parameters or Recall the factory setting of this mode.
EXIT
Press LEFT key will EXIT and not save the parameters you adjust.
Press RIGHT key will exit an save the parameters and adjust.
BRIGHTNESS
Setup the brightness of the panel.
CONTRAST
Setup the contrast of the panel, maybe need fine tune after
auto-tune section (8-3)
11
8.2 OSD Adjusting and Controls
Note:
If the monitor can’t work normally by using incorrect ways, please turn off the monitor.
First keep pressing RIGHT key, then turn on the monitor till the frame appears.
Note:
If you don’t press any key during 15 seconds, the OSD will disappear by itself and not save the
parameters.
