VARSITY Scoreboards 2210, Installation Manual, Page: 14 / 16

14
AFTER INSTALLATION IS COMPLETE, HAVE
THE INSTALLER TEST THE SHOT CLOCKS BY
FOLLOWING THE STEPS BELOW:
TESTING THE INSTALLED SYSTEM
1 /
While holding down the
OPTIONS button, turn the
wireless controller on
2 /
The screen will display
“Select Diag Mode.” Press
the down arrow once to
scroll to “Digit Test.” Press
ENTER.
3 /
The screen will display
“Segment Test” and
“Segments Off”. Press
the down arrow once to
display “Segments On”.
When all segments are on,
all digits should display
“8”
INSTALLING THE HAND-HELD CONTROLLER
Connect the RS-232 jack to the port on the back of the LCD
controller. See image below.
RS-232 Jack