VARO Powerplus XB PQWXB10070, Original Instruction Manual

Page: 51 / 325

POWXB10070
EN
Copyright © 2021 VARO P a g e | 12 www.varo.com
10.5 Hammer Setting
▪
For maximum performance, use a good quality masonry bit for hammer drill, turn the
function mode selector on t
he impact mode position“ ”.
▪
Only use this setting to bore or drill into stone/concrete. The Hammer setting works well
when drilling into materials.
▪
The tip of tool MUST be firmly depressed for the hammer action to engage.
NOTE: Only use a masonry bit when drilling into masonry materials.
11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
12 TECHNICAL DETAILS
Chuck 13 mm keyless
Power supply 20 Volt DC
Gear Train 2 Speed
Rotation Speed 0-400/0-1300 min-1
Impact Rate 0-6000/0-19500 ipm
Clutch 22+1+1 Positions
Torque 30Nm (MAX.)
13 NOISE
Noise emission values measured according to relevant standard. (K=5)
Acoustic pressure level LpA 71 dB(A)
Acoustic power level LwA 82 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) Max 3,6 m/s² K = 1,5 m/s²