POWXG3016
EN
Copyright © 2015 VARO
P a g e
|
11
www.varo.com
11.2
Fuel cap / fuel filter
CAUTION: Remove fuel from unit and store in approved container before
starting this procedure. Open fuel cap slowly to release any pressure which
may have formed in fuel tank.
Keep vent on fuel cap free of debris.
Lift fuel line and filter out of tank. A steel wire with a hook or a paper clip works well.
Pull off fuel filter with a twisting motion.
Replace the fuel filter.
NOTE: Never operate the tool without the fuel filter. Internal engine damage
could result and / or disturb a good operation.
When the inside of the fuel tank is dirty, it can be cleaned by rinsing the tank
out with gasoline.
11.3
Carburettor adjustment
The carburettor was pre-set at the factory for optimum performance.
When further adjustment is necessary, contact the service department.
