POWX410
EN
Copyright © 2021 VARO NV
P a g e
|
4
www.varo.com
4.4
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
Battery use and care :
- Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
-W hen battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
4.5
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5 SPECIAL SAFETY INSTRUCTIONS
5.1
Risk of explosive gases (warning)
Working near a lead-acid battery is dangerous. Batteries generate explosive gases during
normal battery operation. For this reason, it is important that you read this manual and follow
the instructions exactly whenever using your Power Station. Also read and follow the
instructions published by the vehicle battery manufacturer and the manufacturer of any
equipment you intend to use in the vicinity of the battery. Review all caution marking on these
products and on the engine.
5.2
Personal precautions
Wear eye and protective clothing.
Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or
eyes. Avoid touching eyes while working near battery. If battery acid contacts skin or
clothing, wash immediately with soap an water. If acid enters the eye(s) immediately flood
with cold water for at least 10 minutes and get medical attention as soon as possible.
Do not smoke or allow a spark or flame near the battery engine.
