POWX1415
EN
Copyright © 2017 VARO
P a g e
|
6
www.varo.com
9 TROUBLESHOOTING
If any of the following events occur during normal operation, the power supply should be shut
off at once and tool thoroughly inspected by a qualified person and repaired if necessary:
The rotating parts get stuck or speed drops abnormally low.
The tool shakes abnormally accompanied by some unusual noise.
The motor housing gets abnormal hot.
Heavy sparks occur around the motor area.
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11 TECHNICAL DETAILS
Model nr.
POWX1415
Rated Voltage
220-240V
Rated Frequency
50Hz
Rated Power
600W
Rotation speed
0-3500min
-1
Max. cutting depth
115mm
Cable length
3m
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
82 dB(A)
Acoustic power level LwA
93 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Max 13.0 m/s²
K = 1,5 m/s²
