VARO PowerPlus POWX0076LI, Manual

Page: 6 / 11

POWX0076LI
EN
Copyright © 2013 VARO
P a g e | 6
www.varo.com

Replace a broken tension spring before using the machine again.

Never remove the riving knife. The distance between the toothed rim and the riving knife
should be 5 mm maximum. The height difference between the riving knife and the
toothed rim should be 5 mm maximum.

Do not use saw blades made of HSS steel.

Do not use bent, deformed or otherwise damaged saw blades.

Do not use saw blades which do not meet the specifications stated in this manual.

Before sawing, remove all nails and other metal objects from the workpiece.

Never start sawing before the saw reaches its full speed.

Securely clamp the workpiece. Never attempt to saw extremely small workpieces.

Only put the machine aside after switching off and when the saw blade has come to a
complete standstill.

Never try to slow the saw blade down by exerting pressure on the side.

Before performing maintenance to the machine, always unplug the machine.

Keep hands away from cutting area and blade. Keep your second hand on auxiliary
handle or motor housing.

Do not reach underneath the workpiece.

Adjust the cutting depth to the thickness of the workpiece.

Never hold piece being cut in your hands or across your leg. Secure the workpiece to a
stable platform.

Hold power tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring.

When ripping always use a rip fence or straight edge guide.

Always use blades with correct size and shape .

Never use damaged or incorrect blade washers or bolt.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
Leaser beam warning.
Laser beam characteristics.

Warning! The laser beam potentially causes severe eye damage. Never look or stare
directly into the leaser beam.

During use, do not point the laser beam at people, directly or indirectly through reflecting
surfaces.

This laser complies with class 2 according to EN 60825-1:2007. The unit includes no
servicing components. Do not open the housing for any reason. If the unit is damaged,
have the damage repaired by an authorized repair agent.
8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
8.1 Batteries

Never attempt to open for any reason.

Do not store in locations where the temperature may exceed 40 °C.

Charge only at ambient temperatures between 4 °C and 40 °C.

Charge only using the charger provided with the tool.
 When disposing of batteries, follow the instructions given in the section “Protecting the
environment”.