POWEG8012
EN
Copyright © 2021 VARO
P a g e
|
12
www.varo.com
15 STORAGE
Caution! Not following the following instructions may lead to deposits in
the carburetor and to permanent damage.
▪
Execute all the recommendations concerning maintenance specified in the "Maintenance
and care" chapter.
▪
Clean the engine outside surface, the shaft housing, the protective cover, and the string
attachment.
▪
Drain fuel from the tank.
▪
After fuel drainage, start the engine.
▪
Let the engine run at idle until it stops. Asa result of that, no fuel will remain in the
carburetor.
▪
Let the engine cool off (for approximately 5 minutes).
▪
Remove the spark plug with the spark plug key.
▪
Pour a little bit of 2-cycle engine oil into the combustion chamber. Pull the starter rope grip
a few times - oil will spread. Replace the spark plug.
▪
Store the unit in a cool and dry place, which is remote from sources of fire like oil burners,
water heaters etc.
16 RESETTING IN OPERATION
▪
Remove the spark plug and pull the starter rope fast, in order to remove oil from the
combustion chamber.
▪
Clean the sparkplug or replace it, if necessary.
▪
Prepare the unit for resetting in operation and fill the tank with the correct mixture of fuel
and oil (40:1).
