POWDPG7540
EN
Copyright © 2018 VARO
P a g e
|
10
www.varo.com
10.3
Manually thread lengthening (Fig. 6)
▪
The wire can also be lengthened manually if necessary.
▪
Before manually lengthen the wire, remove the battery from the device.
▪
Press the button (16) on the manual extension wire (15) and release it while pulling gently
the wire until it arrives at the cutter.
▪
The wire is too long if it exceeds the level of the cutter.
11 CLEANING AND MAINTENANCE
Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
▪
Regularly clean the ventilation slot in your tool using a soft brush or dry cloth.
▪
Regularly clean the cutting line and spool using a soft brush or dry cloth.
▪
Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
12 STORAGE
▪
Store the trimmer out of reach of children, in a stable and safe position and in a dry place
where the temperature is not too hot or too cold.
▪
Store the trimmer away from direct sunlight, if possible in a dark or barely lit place.
▪
Do not store in a nylon bag because this could encourage the formation of damp patches.
▪
Do not store the grass trimmer resting on the floor. Hang it by the handgrip instead, so that
the guard does not touch anything. The resting of the guard on a surface could alter its
shape and therefore its dimensions and its safety characteristics would be modified.
13 TECHNICAL DATA
Type
POWDPG7540
Voltage
20 V
Cutting width
250 mm
Line size
Ø1.6 mm
Cutting system
1 line/ automatic
No load speed
8500 /min
14 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
74 dB(A)
Acoustic power level LwA
96 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
3.3 m/s²
K = 1.5 m/s²