background image

 

POWX0041LI 

EN

 

Copyright © 2018 VARO 

P a g e

 | 

4

 

www.varo.com 

 

Do not expose charger and 
battery pack to water 

 

Risk of fire! 

 

Only use the battery charger 
indoors. 

 

Do not expose charger and 
battery pack to high temperature 

5  GENERAL SAFETY WARNINGS AND INSTRUCTIONS 

Read all safety warnings and instructions. Failure to heed warnings and follow instructions may 
result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future 
reference. The term "power tool" in the safety warnings refers to your mains-operated (corded) 
power tool or battery-operated (cordless) power tool. 

5.1 

Working area 

 

Keep working area clean and well lit. Untidy and dark areas can lead to accidents. 

 

Do not operate power tools in potentially explosive surroundings, for example, in the 
presence of inflammable liquids, gases or dust. Power tools create sparks which may 
ignite the dust or fumes. 

 

Keep children and bystanders at a distance when operating a power tool. Distractions can 
cause you to lose control of it. 

5.2 

Electrical safety 

Always check that the power supply corresponds to the voltage on the rating 
plate. 

 

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use 
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce 
the risk of a lethal electric shock. 

 

Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and 
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed. 

 

Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will 
increase the risk of a lethal electric shock. 

 

Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power 
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or 
entangled cords increase the risk of a lethal electric shock. 

 

When operating a power tool outdoors, use an extension cable suitable for outdoor use. 
Using a cord suitable for outdoor use reduces the risk of a lethal electric shock. 

 

If operating a power tool in a damp location is unavoidable, use a power supply protected 
by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric 
shock. 

5.3 

Personal safety 

 

Stay alert, watch what you are doing and use common sense when operating a power 
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or 
medication. A moment of inattention when operating a power tool may result in serious 
personal injury. 

 

Use safety equipment. Always wear eye protection. Using safety equipment such as a 
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed 
will reduce the risk of personal injury. 

Summary of Contents for Power Plus POWX0041LI













Reviews: