2
INSTALLATION INSTRUCTIONS
Model
(Nameplate)
Electrical Ratings
Mounting Clearances
Clearance to Combustibles
Floor
Ceiling
Wall
Front
Sides
Volts
Watts
Ft
M
In
mm
In
mm
Ft
M
In
mm
HED66GBK-120PS
110-
120V
1500W
7'
2.1
8"
203
36
914
7'
2.1
36
914
HED66GBK-120
110-
120V
1500W
7'
2.1
8"
203
36
914
7'
2.1
36
914
HED66GBK20
240V
2000W
8'3"
2.5
12"
305
36
914
7'
2.1
36"
914
1.
Carefully open the carton containing your heater and check for damage. If
you find any damage, notify your carrier as freight damage is not covered by
the manufacturer’s warranty. File damage claim directly with carrier
Should you accidentially touch the bulb, clean it with a soft cloth and alcohol.
2.
This heater is intended for wall mounting only using wall bracket provided
with heater - See Fig. 1. See Fig. 2 for
Minimum Mounting Clearances and Fig. 3 for mounting instructions.
3.
Heater must be installed in horizontal position only (as shown).
4.
Heater must be securely mounted to building structure to assure it will not
fall.
5.
Heater is IPX5 Rated for outdoor use.
6.
Heater bracket will allow the heater mounting angle to be adjusted from
approximately 4°- 45 ° from vertical. The optimum angle is 45 ° - see Fig. 3
7.
Do not locate heater directly below an outlet.
8.
Heater is provided with flexible cord for hard wire connection to an
appropriate junction box - see warning 2. Route cord to avoid possible
damage.
Summary of Contents for HED66GBK-120PS
