VARIZOOM TOC F1, Operation Manual

Page: 6 / 10

- 6 -
1. Home Screen
From the Home Screen, you can monitor the current lens position as well as enter the
Control, Calibrate, Setup, and System menu screens.
2. Control Menu
From the Control menu screen, you can set motor or
knob limits, reverse motor or knob response direction, and adjust smoothing.
To set a limit, simply move the knob to the where you want the limit, and tap the “set
limit” button. Once a limit is set, the “Set Limit” button will then read “Clear Limit”.
Tap this button to clear the limit.
Motor and knob response direction is changed by selecting the “Dir+” button located
under either “Motor” or “Knob”. This will change the button to be “Dir-“. Select it
again to change it back.
Smoothing is adjusted by selecting the “set” button next to the “smooth” indicator.
Adjust the “Lens Smoothing” to the desired smoothing level, then press “OK”
Note: The
more smoothing you have, the more delay will show between motor and knob/slider
response.
Press the “ ” button in the top left corner of the screen to return to the Home Screen.