VariZoom Lens Controls
©2006 www.varizoom.com
The TALLY LAMP is the three color light located in the center of the top bezel
(shaped like an elongated white tab)
The Tally Lamp controlling panel is located on the rear panel of the
monitor below the 12v power input.
The RED lamp illuminates when connecting the terminal “R” with “GND”
The GREEN lamp illuminates when connecting the terminal “G” with “GND”
The AMBER lamp illuminates when connecting the terminal “Y” with “GND”
1. Never attempt to insert a knife edge or other sharp instrument into the cooling vents, inputs or other
casing as this may cause damage.
2. Never attempt to disassemble any part of the monitor kit, doing so will VOID the
manufacturer’s warranty.
3. Avoid touching the LCD screen, oils and debris from fingers can degrade the surface.
4. Never press firmly into the LCD screen as this will cause damage.
5. It is recommended that the supplied power adapter is the ONLY one used with this kit, using a different
power supply could result in damage.
6. It is also recommended that the power supply be unplugged from the unit when not in use.
7. Never mount the monitor or pan/tilt trestle on an unstable surface.
8. Never operate the monitor in conditions that are excessively hot, humid or cold.
9. Please use a soft cloth and light pressure to clean the LCD screen, never use chemical cleaners or
heavy pressure.
Tally Lamp
Contents of Kit
Caution
5
4
3
2
1
6
7
8
9
R
G
B
GND
1 S-1080BP/BC/BJ/BS - High resolution monitor
1 User manual
1 12v Power supply
1 Pan/Tilt trestle
1 Plastic sun-hood
VariZoom SWIT reserves the right to change the contents/specifications
without notice due to continual product development.
