This monitor is compatible with the following input resolutions: NTSC - 480p/480i, 720p/720i, 1080i
PAL
-
576p/576i,
720p/720i,
1080i
VariZoom Lens Controls
©2006 www.varizoom.com
Specifications
Assembly
Sunhood and Pan/Tilt trestle
Operating voltage:
12v DC or SONY V-Lock Battery
Rated power consumption:
≤
12w
Viewing angle:
h/v 90
˚
/120
˚
Screen area:
8
inches
Dimensions:
8.5 x 5 x 1.5 inches
Resolution:
800 x 480 pixels
Color system:
NTSC/PAL
Brightness:
400
cd/m2
Contrast: 400:1
Weight:
6 lbs(kit) / 1.75 lbs(monitor)
3. Ratio Select
Each press of the RATIO button cycles through the following display modes: 16:9, 16:9 w/framing guides, 4:3,
4:3 w/framing guides. This feature is only available when a source is detected by the monitor. Each press of the MINUS
(-) button will flip the image onscreen along the horizontal axis. This can be useful when utilizing a depth-of-field adapter
on your camcorder.
4. Menu Operation
Press the MENU button once to display the adjustment screen. Each
press of the MENU button will cycle through the choices available, the current
selection will be highlighted in yellow.
Press “-” or “+” to change the value of the selection, all changes will
be saved in the monitor until factory reset is performed.
When FACTORY is selected, press “-” to restore original defaults to all
values or press “+” to exit the menu and keep the current values.
NOTE: The menu will save changes and close if the monitor remains idle for
1. Place the right side baffle into the groove of the coping board. Be sure
to match the pegs on the baffle with the slots on the coping board, gently
slide into place.
2. Repeat step one with the left baffle. Either baffle can be installed first.
3. Slide the hood onto the monitor from the top, be sure to match the
pegs on the baffles with the slots on the rear of the monitor. Slide the
pegs down into the slots until they “lock” into place, all edges will be flush
with the monitor.
upper arresting disc
locking disc
rotation axis base
locking knob
lower arresting disc
clamp knob
left baffle
mounting
pegs
right baffle
coping board
slots for pegs
The Pan/Tilt trestle
provides secure
mounting of the monitor
to a variety of surfaces.
