Variquest Trifecta 800 Quick Start Manual Download Page 4

Page: 4 / 4

TECHNICAL SUPPORT

MAIN

TEST_PRINT.G
VASE.G
BRACELET.G
YOUR_PRINT.G

STARTING A PRINT

From the main menu, turn the dial to scroll to Print.

Push down on the dial to select.

Scroll down to the file you want to print and push

down again to start the print.

Temp

MAIN

Status

Axis

Wizard

Whenever you begin a print, always check that the first layer of the print is properly stuck onto the blue painter’s tape. A

properly leveled bed should have the extruded filament a bit squished and shouldn’t pop off the bed easily. While the

printer is performing the skirt nozzle purge, observe the deposited filament and make micro-adjustments with the thumb-

screw if necessary.

TOO CLOSE

LEVELED

TOO FAR

For technical assistance, please contact your authorized VariQuest dealer or the VariQuest Technical Support team:

• Phone: 1-800-328-0585

Y2900354 8/2015

Summary of Contents for Trifecta 800

Page 1: ...ring shipping UNBOXING TIPS Open shipping box and remove the compartment lid 1 Remove foam bracket and take out the printer and filament 2 Remove printer accessories from the compartment 3 Trifecta 80...

Page 2: ...INSTALLING THE FILAMENT Extend the filament guide tube from the retracted position 1 Remove the filament spool from the packaging and place it on the spool holder 2 Take the end of the filament from t...

Page 3: ...er s bed level 2 Place the glass print surface onto the bed with the blue painter s tape side facing upward The tape will act as an adhesion material for the plastic 1 With the clips provided in the k...

Page 4: ...e print is properly stuck onto the blue painter s tape A properly leveled bed should have the extruded filament a bit squished and shouldn t pop off the bed easily While the printer is performing the...