Insert the male end of the power cord into an electrical socket.
2
Make sure the power switch on the printer is in the Off position ( O ).
1
Insert the female end into the power socket located on the back of the printer.
3
Turn on the printer by flipping the power switch to the On position ( I ).
4
6
TURNING ON THE PRINTER
INSTALLING THE FILAMENT
Extend the filament guide tube
from the retracted position.
1
Remove the filament spool from
the packaging and place it on
the spool holder.
2
Take the end of the filament
from the spool and insert it
into the guide tube.
3
Use extra caution when cutting off the zip ties
to prevent damage to the motion belts or wires.
Using a pair of scissors, cut away the two zip ties that are
securing the extruder in place.
Make sure the spool will spin
clockwise as the filament
feeds into the guide tube.
