Vario 2GIG Installation And User Manual Download Page 9

2GIG Vario LCD Keypad Installation & User Guide

Using the Proximity Tag

The proximity tag, used with the proximity LCD keypad (2GIG-VAR-LCDPROX) is correctly used by applying it within a 4 cm distance from the front of the
keypad bottom, as shown below.

This feature is only available on certain keypads. Check with your security provider to see if your keypad supports this feature.

Automatic Upgrade Resulting from Panel Manual Upgrade

Upon initiation of the 2GIG Vario system panel remote upgrade (see the 2GIG Vario Installer Manual, Appendix I: Remote Software Upgrade), the LCD

keypad also may be automatically upgraded. During this approximately tree-minute process, an upgrade icon (

) and the power icon (

) are

displayed on the keypad and the LED light flashes. Do not disconnect during this period.

This feature is only available on certain keypads. Check with your security provider to see if your keypad supports this feature.

Technical Specifications

Current Consumption

2GIG-VAR-LCD1

2GIG-VAR-LCDPROX

13.8V ± 10%, 48 mA typical/52 mA max.

13.8V ± 10%, 62 mA typical/130 mA max.

Main Panel Connection

4-wire BUS, up to 300 m (1000 ft) from main panel

Dimensions

153 x 84 x 28 mm (6.02 x 3.3 x 1.1 in)

Operating Temperature

–10 to 55°C (14°F to 131°F)

Storage Temperature

–20 to 60°C (–4°F to 140°F)

Prox. RF Frequency

13.56MHz

Ordering Information

2GIG-VAR-LCD1

2GIG Vario LCD Keypad

2GIG-VAR-LCDPROX

2GIG Vario Prox Keypad = 2 Keytags

Copyright © 2016 Nortek Security & Control LLC

9

Summary of Contents for 2GIG











Reviews: