4
ACCESSORIES
Stainless steel dough hook
VHOOK-05
Stainless steel wire whip
Stainless steel flat beater
Plastic bowl lid
VBLID-05
Stainless steel bowl
VBOWL-05
Ingredient chute
VCHUTE-05
Splash guard
VRING-05
2
1
Maintenance:
The mixer
requires no maintenance (motor and bearings for the
mechanical parts are greased for life).
Safety device:
Check the function of the safety device regularly:
•
The motor must stop when the rotary knobs is in neutral
position
(see fig. 3B)
.
If the safety device does not function, do
not use the mixer. Contact your dealer.
List of errors and possible solutions:
If the problem cannot be solved, contact
your dealer.
The mixer does not start:
Check that ...
•
The upper part of the mixer is in its down position.
•
The mixer is plugged in and connected to power.
•
The electrical power supply is correct.
•
The fuse in the cable plug
(fig.6, 1)
has not been burned.
If the fuse is defective, it can be replaced by the extra fuse
(fig.6, 2)
that is also available in the cable plug.
The mixer stops during work:
•
The mixer is overloaded due to too high speed or too
heavy loading. See the paragraph
“Overloading”
.
In case of power failure set the rotary but-
ton back to neutral position, and the mixer
can be started again.
The tool is stuck in the bayonet shaft:
This is normally due to insufficient cleaning or damaged hole in
the tool:
•
When the tool is stuck, do not force it free. Apply a little
oil and let this work a couple of minutes.
•
Turn the tool backwards and forwards until it can be removed.
Abnormal noise:
Metallic noise ...
•
The tool is distorted and hits the bowl.
•
The bowl has been damaged or is not in its proper position.
Fig. 6 Fuses in the cable plug.
