7
Set the speed.
(
VL-1, VL-1L
)Turn the speed selector lever
(Fig. 1)
to the
rear until the required speed has been obtained,
Before the mixer is stopped, turn the
speed selector lever back to the lowest
speed.
(
VL-1S)
press
or
speed indicator on the right side
of the mixer panel.
(notice the recommended maximum speeds on
page 5)
.
The mixer will run until the time set on the timer runs out or
the user stops the mixer manually.
Stop the mixer without resetting the timer (Pause)
If it is needed to add ingredients or check the content of the
bowl, the mixer can be stopped without resetting the timer.
• (VL-1)
Press
and the mixer stops.
• (VL-1L, VL-1S)
Press
the mixer stops.
The safety guard can now be opened and the bowl can
be lowered.
The emergency stop should only be used in
emergency situations and for powering off the
mixer. Do not use the emergency stop in nor-
mal operation.
If the emergency stop is activated or main power to the
mixer is cut off, the tool stops rotating and the timer is
reset to zero.
Timer automatically repeats the previous setting:
When the set time runs out, the tool stops rotating, the
timer shortly display [0000] and will then display the previ-
ous selected running time.
More about the timer:
Timer settings of up to 90 minutes.
If no running time is selected, the display will show the
time elapsed since the mixer was started.
Automatic lowering of the bowl
(VL-1L, VL-1S):
If the timer is in use, the bowl can automatically be low-
ered when the time runs out and the mixer stops.
While the mixer is running, double click
, The green
LED by
will flash until the mixer stops.
When automatic lowering of the bowl is selected it is
important that you use
to stop and start the mixer,
otherwise the selection will be reset.
Before starting the mixer:
Ingredients can be filled in the bowl at any time before
the mixer is started.
1. Place the tool into the bowl.
2. Place the bowl in the bowl arms.
3.
Grab the tool and lock it into the bayonet fitting.
4. Lift the bowl to working position.
5. Close the safety guard,
(Fig. 3).
If desired, set an operating time.
The mixer is now ready to be started.
Start the mixer:
Press
to start the mixer.
Power OFF the mixer
-
Push the emergency stop.
Power ON the mixer
-
Turn the emergency stop clockwise.
(VL-1L, VL-1S) Bowl down/
(VL-1S + Speed down)
(VL-1L, VL-1S) Bowl up/
(VL-1S + Speed up)
Start/Stop -
(VL-1 - Pause)
Pause function
To be used when check
-
ing the contents of the
bowl or otherwise paus
-
ing the mixer.
(VL-1L, VL-1S)
Pause
Emergency stop
Only to be used for
emergency situations
and for powering off
the mixer.
Timer [mmss]
Reset the timer by press
-
ing the two timer buttons
at the same time. Time
is shown in minutes and
seconds.
Time down
Time up
To start the mixer again, close the safety guard lift the
bowl. The mixer can now be started by pressing
(VL-1)
/
(VL-1L, VL-1S)
and the timer will continue
counting down.
Reset the timer:
Reset the timer by pressing the two timer buttons at the
same time.
Operating the frontpanel:
