Page 5
CHAPTER 1 - INTRODUCTION
1. GENERAL
This document provides a description of the MST-1 control
panel. This document is organized as follows:
•
Introduction
•
Installation
•
User’s Guide
•
Appendix
1.1 DESCRIPTION
Congratulations on the purchase of your MST-1
environmental control system. The MST-1 product line
provides you with full control over temperature, air flow,
and heat resulting in a good air quality.
The MST product line offers these features:
•
Heating or cooling mode
•
Hi/Lo temperature indication.
•
Automatic temperature reduction (ramping).
•
Computer compatible with RCM-40.
The MST-1 provides microprocessor control over a single
stage output.
This stage controls a single speed fan or a heater. To cool
the room when the temperature is higher than the main set
point, use the MST-1 in cooling mode. Or to heat the room
when the temperature is lower than the main set point, use
the control in heating mode. In addition, the first stage may
be programmed to cycle on and off.
CHAPTER 1 - INTRODUCTION
www,monitrol.com
