Varian DS102 1Ph, Nstruction Manual

Page: 47 / 79

TECHNICAL INFORMATION
1. Disconnect the motor bearing plate (8) from the support (34) by removing the four screws (4).
2. Remove the half-joint/fan (19) from the support, together with the motor (1), the plate (8).
3. Slacken the nut blocking the half-joint (19) to the motor shaft and take it out, using leverage between the
plate (8) and the back of the joint.
4. Remove the four screws (5) and separate the plate (8) from the motor (1).
5. Reassemble by proceeding in the inverse order.
Extractor
42 87-900-943-01(E)