Vari VARIMATIC 300, Instructions For Use Manual

Page: 17 / 35

17
1. Test whether the emergency stop switch functions properly. Once the
emergency stop switch is pushed down, pressing down the button switches on
the log lock handle and the log saw handle simultaneously cannot activate the
rotation of the chain saw to cut wood and pushing down the cylinder control
switch on the electric box cannot activate the push block into forward stroke to
split wood, although the machine is still in power.
2. Turn the emergency stop switch in the clockwise direction and return to its
original position. Press down both of the button switches simultaneously, and
the chain saw returns to its normal cutting rotation. Push down the cylinder
control switch on the electric box, the push block returns to its normal splitting
movement.
3. After assembly, make sure that all the parts are tight to exclude dangerous
factors.
4. Take the use of the correct power supply and cables. Put the plug in the
socket and turn on the motor switch. Close the steel mesh, insert the key (part
of the steel mesh) into the limit switch A for steel mesh, hook the steel mesh.
5. Place the log on the roller conveyor and adjust the log cut length by the cut-off
length gauge. Hold the log saw handle and the log lock handle respectively
with each hand and press down the button switches C/D on both handles
simultaneously to activate the rotation of the chain saw. Press down evenly
until the log is sawed and dropped right into position in the splitting area.
Release the button switches C/D to stop the chain saw which returns to its
original position automatically.
Do not start the day with a dull or damaged chain. If the chain is
loose, turn the chain tension bolt in the clockwise direction to
tighten it. Grease the chain saw mount every 4 to 6 hours of
operation.