Vari Liza DS-520 Instructions For Use Instructions For Use Download Page 29

  

DS-520 Líza 

  DS-520H Líza

 

 29 

10 List of Guarantee 

To be completed by the manufacturer 
Name of product  Manually Pushed Drum Mower 
Model   DS-520 Líza*  DS-520H Líza* 
Serial number  …………………………………………………………………………. 
Engine serial number …………………………………………………………………………. 
Warranty (months)  …………………………………24………………..……………………... 
Output control  …………………………………………………..……………………... 
 
The above product was passed over to the purchaser without any defects including the appropriate commercial and technical 
documentation  and  accessories.  The  purchaser  was  duly  informed  about  principles  of  sound  operation  and  technical 
maintenance of the product. 
 
To be completed by the seller 
Name of purchaser  …………………………………………………………………………. 
Address of purchaser …………………………………………………………………………. 
Purchaser’s signature …………………………………………………………………………. 
Place of sale  …………………………………………………………………………. 
Date of sale  …………………………………………………………………………. 
 
Seller’s stamp and signature  …………………………………………………………………………. 
 
GUARANTEE CONDITIONS 
Subject of warranty: 
Warranty relates to the basic product including accessories supplied by VARI a.s. 
Warranty period: 
Warranty  period  for  the  product  and  accessories  supplied  with  the  product  is  24  months  from  the  date  of  sale  to  the 
purchaser  if  not  stated  otherwise  in  the  “Service  Manual  for  VARI  Machines  and  Systems  Equipped  with  HONDA 
Engines“
. Time from the enforcement of liability for defects to the date when the user was obliged to take over the thing 
after the end of repair is not included in the warranty period. 
The seller is obliged to give the purchaser a receipt confirming the date of the right exercise and repair and the time of its 
duration. If the product  is  exchanged,  the warranty period  starts  running  again from the date on which the purchaser took 
over  the  new  product.  If  it  is  a  whole  assembly  to  be  replaced,  the  warranty  period  starts  running  for  the  given  assembly 
again from the date of product take-over. 
Scope of manufacturer’s liability: 
The  manufacturer  bears  responsibility  for  the  product  having  properties  usual  for  the  kind  of  the  product  in  question  and 
specified parameters for the whole period of warranty. The manufacturer does not answer for defects of the product resulting 
from current wear or from the product’s use for purposes other than specified. 
Warranty extinction: 
Claim of warranty extincts if: 

a) the  product  was  not  used  and  maintained  as  specified  in  the  Instructions  for  use,  or  it  was  damaged  by  any 

unauthorized operation by the user; 

b) the product was used in conditions or for purposes other than specified; 
c) the letter of guarantee for the product cannot be presented; 
d) data  filled  in  the  original  product’s  documentation  by  the  manufacturer,  seller  or  service  organization  were 

intentionally falsified; 

e) a part of the product was replaced with a non-original component; 
f) the product was damaged or excessively worn due to improper maintenance; 
g) the product suffered an accident or was damaged by an inevitable accident (force majeure); 
h)  a modification was made to the product without manufacturer’s consent; 
i) defects result from improper storage of the product; 
j) defects result from natural and common operating wear of the product;  
k) the prescribed warranty inspection of the product was not made within the prescribed time (this applies only for 

products  with  extended  warranty  period).  Warranty  inspections  must  be  made  in  selected  products  with  the 
extended warranty period according to terms stipulated in the “Service Manual for VARI Machines and Systems 
Equipped with HONDA Engines“.
  

l) the product was connected or operated with equipment not approved by the manufacturer. 

Complaints: 
Complaints  are  applicable  by  purchasers  at  the  seller’s.  When  applying  a  complaint,  the  purchaser  is  obliged  to  submit  a 
duly filled in letter of guarantee. Warranty repairs are carried out by seller or by special service shops appointed by seller. 
Legislation: 
Other purchaser/seller relations are ruled by relevant stipulations of the Civil Code No. 47/1992 Gaz., and/or Commercial 
Code No. 513/1991 Gaz. as amended. 

 
*) delete as appropriate

 

Summary of Contents for Liza DS-520
































Reviews: