Vari Liza DS-520, Instructions For Use Instructions For Use, Page: 20 / 31

DS-520 Líza
DS-520H Líza
20
e) Put the wheel back and screw on the outer cone. Screw in the nut and tighten the cone
against the nut so that the wheel can freely turn but does not have substantial side
clearance.
6.9 Machine storage.
Prior to a longer storage, clean the machine from all dirt, debris and plant residues.
Repair damaged paint on machine parts. Conserve the blades on the mowing disk if the
machine is to be put out of operation for a longer time. Prevent access of unauthorized
persons to the machine. Protect the machine from weather impacts; don’t use air-tight
protection due to a possibly increased corrosion under it.
6.10 Disposal of packaging and machine after the end of service
life.
After unpacking the machine, you are obliged to provide for the disposal of packaging
material with taking into account the use of secondary raw-materials according to Waste
Law No. 185/2001 Gaz. (and/or its amendments) and with respect to the decrees of local
town or municipal authorities.
The following procedure is recommended for machine disposal after the end of its
service life:
1. Dismount all parts from the machine that can still be used.
2. Dismount plastic machine parts and parts made of non-ferrous metals. The dismantled
machine remainder and the dismounted parts are to be disposed according to Waste Law
No. 185/2001 Gaz. (and/or its possible amendments) and with respect to the decrees of
local town or municipal authorities.
Figure 8: Travel wheel bearing – parts
Machine
frame
Distance ring
Cone
Bearing
Wheel rim with tyre
Cone
Bearing
Nut