How To Link 2 Panels:
1
2
3
4
To use both panels and create a privacy and modesty panel setup, put one
upward facing bracket on top of a downward facing bracket.
To attach the brackets, put the bolt through the bracket cutout. Find the pre-drilled holes
located underneath the desk near the cable tray. Attach the bracket to the desk using the
included hand bolt. Do not fully tighten.
One at a time, align the holes of each panel with the front of each set of brackets.
Push each panel onto the brackets on each side.
Press the bracket cover onto the front and pull down. Adjust the panels as needed to
accommodate cords or desk items. Fully tighten the bolts once the panels are in your
preferred position.
