Vari 432HB Instructions For Use Manual Download Page 16

 

 

EN

 

16 

LETTER OF GUARANTEE 

 

Information on the purchased machine 

Name of product   

Brushcutter 

 

Model 

 

 

VARI 432HB

 

 
Serial number 

 

……………………………  Engine serial number 

…………………………… 

 
Warranty (months)  

……………………………  Output control 

 

…..……………………..... 

 
 

Information on the purchaser 

Name of purchaser  

…………………………………………………………………………. 

 
Address of purchaser 

…………………………………………………………………………. 

 
Purchaser’s signature 

…………………………………………………………………………. 

 
Place of sale 

 

……………………………  Date of sale 

 

…………………………… 

 
 
 
 
 
Seller’s stamp and signature  …………………………………………………………………………. 
 
The  purchaser  confirms  with  his/her  signature that the  above  mentioned product  was  duly  demonstrated  to  him/her,  he/she 
took  the  product  over  in  working  and  fully  functioning  order  without  any  defects,  including  the  instructions  for  use, 
accessories and that the information on the purchaser are stated truthfully. The purchaser was duly informed about the way of 
use,  principles  of  correct  operating,  safety  using  of  the  product,  its  control  and  principles  of  technical  maintenance  of  the 
machine. 
 

GUARANTEE CONDITIONS 

 
1.

 

The warranty only applies to new products sold by authorized sellers of VARI, a.s., produced and distributed by VARI, 
a.s. Libice nad Cidlinou. 

2.

 

The  authorized  seller  of  VARI,  a.s.  is  obliged  to  make  the  purchaser  familiar  with  the  Instructions  for  use  when  the 
product is being handed over, demonstrate the product and duly fill in the Letter of guarantee. Following items have to 
be shown in the Letter of guarantee: identification data of the authorized seller of VARI, a.s., identification data of the 
product, especially type,  machine serial number and engine serial number. Information on the machine owner (i.e. the 
purchaser) which sufficiently identifies him/her must also be included. All these data have to be written in the Letter of 
guarantee in an unerasable manner at the moment of sale of the product. 

3.

 

Only the authorized service workshop of VARI, a.s. is authorized to carry out the warranty repairs. 

4.

 

When making a warranty claim, the product must be handed over to the authorized service workshop of VARI, a.s. with 
complete accessories and with duly filled-in original of the Letter of guarantee. 

5.

 

When  handed  over  for  a  warranty  repair,  the  product  must  be  clean,  without  dust,  dirt  (such  as  grass  residues)  and 
packaged in such a way that it can’t be damaged during transport. The authorized service workshop of VARI, a.s. bears 
no responsibility for damages on the product caused by the shipper or during transport of the goods. 

6.

 

The authorized service workshop also bears no responsibility for accessories sent with the product which are not part of 
the basic equipment of the product. This provision doesn’t apply to accessories which can’t be removed because of the 
defect on the product. 

7.

 

The  warranty  period  of  ……  months  from  the  date  of  sale  shown  in  the  Letter  of  guarantee  is  granted  for  defects  of 
material and production defects on the purchased product. During this period the authorized service workshop of VARI, 
a.s.  will  remove  any  defects  found  on  the  product  –  machine  free  of  charge  according  to  legal  regulations  and  to  the 
Guarantee conditions. 

8.

 

The warranty only applies to material defects and malfunctions resulting from production faults. This warranty doesn’t 
limit the legal rights, it is an addition to them. 

9.

 

The warranty repair claims can only be made if no unauthorized modifications of the machine design and/or repairs of 
the  machine  were  made  by  the  Purchaser  or  another  unauthorized  person  and  if  the  machine  was  used  in  conformity 
with the Instructions for use. The warranty is only granted on the original parts. 

10.

 

If the product is sold, the right to make a warranty claim can be transferred to the new owner for the remaining time of 
validity of the warranty. 

11.

 

The producer is responsible for the product having properties usual for the kind of the product in question for the whole 
warranty period; at the same time the producer reserves the right to make design modifications without prior notice. 

12.

 

The Letter of guarantee is only valid if presented together with the sales receipt of the product. 

13.

 

The claim of warranty expires if: 

Summary of Contents for 432HB



















Reviews: