Vari Lite VL3000 Series, User Manual

Page: 31 / 86

I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
0 2 . 9 6 7 8 . 0 0 0 1 A 20 - Au g- 03 13
Installing in Truss:
Step 1. Using two people, lift luminaire into mounting position.
Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g.
wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect one end of cable to luminaire handle.
b. Loop at least once around truss/pipe and attach other end of cable to other handle.
Step 4. Connect power and data cables according to procedure given in “Connecting Data and
Power” on page 14 .
Figure 2-4: Hanging Configuration and Dimensions
Handles are approved
safety cable anchor points.
18"
(457 mm)
14.5"
(368 mm)
5"
(127 mm)
31.57"
(802 mm)
26.56"
(675 mm)
20"
(508 mm)
24"
(610 mm)
26"
(660 mm)
Safety Cable:
Recommended for all hanging installations
and may be required by local codes.
Safety Cable
(not included)
Top View
Loop at
least once