Vari Lite VL 2600, Quick Start Manual

Page: 1 / 8

1
Quick Start Guide
VL2600
ProfiLe, SPot, WaSh
02.1711.0022 reV B 09/21
OVERVIEW
VL2600 Profile 88-105-7270-00
VL2600 Spot 88-105-6950-00
VL2600 Wash
88-105-7340-00
POWER CONNECTOR
VL2600
QUICK START GUIDE
(this document)
WARRANTY CARD
INCLUDED ITEMS
This document provides basic setup instructions and safety
warnings for the following product(s):
QUICK START
GUIDE
POWER
CONNECTOR
WARRANTY
CARD
CONNECTING POWER
This fixture requires standard AC power distribution from 100VAC-240 VAC, 50/60
Hz. Current required depends on the AC supply voltage and product model.
NOTE:
The mating Neutrik® powerCON® True1 connector is supplied; however, you will
need to purchase or construct a cable appropriate for your application.
Depending on the application, the luminaire’s AC input cable may require a different
connector. If required, install a new connector meeting your requirements using the
following wire color code reference:
WARNING:
DO NOT connect to three-phase service in countries with 240V power.
iNStaLLatiON aNd SetuP
AC power input
WIRE* CONNECTION
Green/yellow ac ground
Blue ac neutral
Brown ac line
* international (Harmonized) Standard
For single-phase power at 240 volts RMS: For three-phase power at 200 volts RMS:
CONNECTION PIN
ac neutral X
ac line Y
Ground (earth) G
X
Y
G
CONNECTION PIN
Phase 1 X
Phase 2 Y
Ground (earth) G
CURRENT VERSUS VOLTAGE
TABLE 1
provides the luminaire’s current draw at
specific voltages. Total luminaire current is calculated
with the lamp on and all motors sequencing.
CONNECTING DATA
A maximum of 32 luminaires may be connected in
any one DMX data link.
NOTE:
This maximum limit applies to the luminaire “daisy
chain” only. Your system or console may require fewer
luminaires on a single data link path. Consult your console
documentation for more information.
AC VOLTAGE
AT 60HZ
TOTAL LUMINAIRE CURRENT
(MOTOR + LAMP CURRENT)
PROFILE SPOT WASH
100V 7.8a 7.5a 7.1a
110V 7.0a 6.7a 6.3a
120V 6.4a 6.1a 5.8a
130V 5.9a 5.6a 5.3a
200V 3.8a 3.6a 3.4a
210V 3.6a 3.5a 3.3a
220V 3.4a 3.3a 3.1a
230V 3.3a 3.2a 3.0a
240V 3.2a 3.1a 2.9a
TAbLE 1. CURRENT VS. VOLTAGE (550W LAMP)