7
USER MANUAL
912400575012UM
WWW.VA R I - L I T E .CO M
Reboot Fixture
Select Reboot Fixture, press the ENTER button to confi rm, Are you sure? will show on the display, press the EN-
TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Version
Select Version, press the ENTER button to confi rm, Version will show on the display, press the MENU button
back to exit.
Fixture Hours
Select Fixture Hours, press the ENTER button to confi rm, Fixture Hours will show on the display, press the MENU
button back to exit.
Crossload (Software)
Select Crossload (Software), press the ENTER button to confi rm, Send will show on the display, press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Service
To select Service, press the ENTER button to confi rm. Use the UP/DOWN button to select Service Settings or
Diagnostics, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Service Settings
Select Service Settings, press the ENTER button to confi rm. Optics Off set will show on the display, press the
ENTER button to store, Zoom will show on the display. Press the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
Diagnostics
To select Diagnostics, press the ENTER button to confi rm. Use the UP/DOWN button to select Fan Check or Led
Temp, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Manual Control
Enter menu mode, select Manual Control, press the ENTER button to confi rm, use the UP/DOWN button to
select Intensity, Intensity fi ne
…
All functions. Use the UP/DOWN button to adjust the value from 0 to 255, press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Test
Enter menu mode, select Test, press the ENTER button to confi rm, use the UP/DOWN button to select All Test,
Pan/Tilt Test, Test Channel, Encoder Pan or Encoder Tilt.
All Test
Select All Test, press the ENTER button to confi rm, the unit will run all test. Press the MENU button back to the
last menu or exit menu mode after auto test.
Pan/Tilt Test
Select Pan/Tilt Test, press the ENTER button to confi rm, the unit will run Pan/Tilt test. Press the MENU button
back to the last menu or exit menu mode after auto test.
Test Channel
To select Test Channel, press the ENTER button to confi rm, the present channel will show on the display, use
the UP/DOWN button to select channel Intensity …All fuctions, press the ENTER button to confi rm, then use the
UP/DOWN button to adjust the value, press the ENTER button to store, the fi xture will run as the channel value
indicates. Press the MENU button back to the last menu or exit menu mode idling one minute.
Encoder Pan
Select Encoder Pan, press the ENTER button to confi rm, displays pan encoder will show on the display. Press
the MENU button back to the last menu or exit menu mode after auto test.
Encoder Tilt
Select Encoder Tilt, press the ENTER button to confi rm, displays tilt encoder will show on the display. Press the
MENU button back to the last menu or exit menu mode after auto test.
