USER MANUAL
WWW.VA R I - L I T E .CO M
VL800 EVENTPROFILE
27
LED Hours
Select LED Hours, press the ENTER button to confi rm, LED Hours will show on the display, press the MENU
button back to exit.
Reset LED Hour
Select Reset LED Hour, press the ENTER button to confi rm, Are you sure? will show on the display, press the EN-
TER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Dimming Curve
To select Dimming Curve, press the ENTER button to confi rm. Use the UP/DOWN button to select Square Law,
S Curve or Linear, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Dim Snap
To select Dim Snap, press the ENTER button to confi rm. Use the UP/DOWN button to select Snap On or Snap
Off , press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one min-
ute to exit menu mode.
Output Mode
To select Output Mode, press the ENTER button to confi rm. Use the UP/DOWN button to select Boost, Standard
or Studio, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Fan Mode
To select Fan Mode, press the ENTER button to confi rm. Use the UP/DOWN button to select On or Auto, press
the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Refresh Rate
To select Refresh Rate, press the ENTER button to confi rm. Use the UP/DOWN button to select 900Hz, 910Hz,
920Hz, 930Hz, 940Hz, 950Hz, 960Hz, 980Hz, 990Hz, 1000Hz, 1500Hz, 2500Hz or 4000Hz, press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Movement
To select Movement, press the ENTER button to confi rm. Use the UP/DOWN button to select Pan Motor or Tilt
Motor, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Pan Motor
To select Pan Motor, press the ENTER button to confi rm. Use the UP/DOWN button to select Enable or Disable,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Tilt Motor
To select Tilt Motor, press the ENTER button to confi rm. Use the UP/DOWN button to select Enable or Disable,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Display
Select Display, press the ENTER button to confi rm. Use the UP/DOWN button to select Miss Orientation? or On
Time, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Miss Orientation?
Select Miss Orientation?, press the ENTER button to confi rm, Use the UP/DOWN button to select Up or Down,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
On Time
Select On Time, press the ENTER button to confi rm, Use the UP/DOWN button to select 30 Sec, 5 Min, 10 Min
or On, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Focus Compensate
Select Focus Compensate, press the ENTER button to confi rm, Use the UP/DOWN button to select Disable, 5M,