Vari Lite EVENTPROFILE VL800, User Manual

Page: 19 / 34

USER MANUAL
WWW.VA R I - L I T E .CO M
VL800 EVENTPROFILE
19
TABLE 5. CONTROL CHANNEL
RANGE
DMX
ITEMS DESCRIPTION
POWER
CYCLE
RULES
RECAL
RULES
REST TO
DEFAULT
FIXTURE
RESET TO
DEFAULT
UI
41 - 45
Dimming Curve
Linear
Selects Linear Dimming Curve
Removed if used in programmers
channel
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
46 - 50
Dimming Curve
S-Curve
Selects S-Law Dimming Curve;
Removed if used in programmers
channel
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
51 - 55
Dimming Curve
Square Curve
(Default)**
Selects Square -Law Dimming Curve;
Removed if used in programmers
channel
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
56 - 60 Reserved Values
61 - 65 Dimmer Snap On
Allows for fastest output changes
between levels but reduces smoothness
dimming LED; Removed if used in
programmers channel
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
66 - 70
Dimmer Snap Off
(Default)
Ensures all fades between output
levels remain smooth and fl icker free
limits fast instant snaps between
levels; Removed if used in programmers
channel
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
71 - 75 Reserved Values N/A
76 - 80 Display On
Remote activation of User interface
display back light - on for 10 mins
N/A
81 - 85 Display Off
Display off switches off display before
time out
N/A
86 - 90 Status Check
Activates status check - Green activates
and show green for 5 mins if no errors
present; Show red if fi xture is reporting
and error
N/A
91 - 95
Color Calibration
on
Turns Color calibration on for fi xture to
fi xture color matching on all mixed and
preset colors between fi xtures limits
highest output and max saturation on
some colors
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
96 - 100 Color Calibration
off (Default)
Turns Color calibration off fi xtures
may not match fi xture to fi xture offers
highest output and deepest saturation
of color
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
101 - 105 Reserved Values N/A
106 - 110 Boost Mode
Boost mode – LED output boosted to
>120% of standard output fan speeds
increased manage heat level of LED
(may be limited to only run for XXhrs)
NC45 – NC55 *Fans can be switched
between On (136-140) & Auto (141 - 145)
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
111 - 115
Standard Mode -
Fixture operates at
maximum output
(Default)
Standard mode - Full LED
Full Continuous Fan Spin at top speed
(loudest setting) (Fan remain at a
constant speed and do not ramp up and
down) NC40 *Fans can be switched
between On (136-140) & Auto (141 - 145)
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default
116 - 120
Studio Mode -
Reduced output
with lower fan
settings
Studio Mode - Fan speed reduced
to appropriate amount to reduce dB
levels >10% of full speed + LED @ max
output approximately 80% of Standard
output at appropriate level to ensure
LED work at optimum temperature and
output ef fi ciency (fan speed remains at
a constant speed and do not ramp up
or down) NC35 *Fans can be switched
between On (136-140) & Auto (141 - 145)
Hold
Setting
Hold
Setting
Resets to
Default
Resets to
Default