Vari Lite BeamLine VL800, Quick Start Manual

Page: 12 / 16

11 88-105-7290-00
DMX Address
To set, edit, and save a DMX address:
Step 1. Press [ESC].
Step 2. Press [Up] / [Down] arrows until
Address
(DMX Address) appears. Press OK [Enter].
Step 3. Use [Left] and [Right] arrow buttons to scroll through all digits.
Step 4. Once at desired digit, use [Up] and [Down] arrows to change highlighted digit.
Step 5. Once digit is set, use [Left] and [Right] arrow buttons to set other digits in DMX address.
Step 6. Once all digits are set in DMX address, press OK [Enter] to set.
Step 7. DMX will display and is saved.
Other LCD Display Features
Status Bar
The Status Bar is present at all times and displays operational information for the luminaire. The Status Bar contains the
following information:
•
CURVE
– Displays dimmer curve type (linear curve/s-curve/square curve/PL curve)
•
ERRORS
– Displays number of Errors or NO for zero errors.
•
MAP
– Displays DMX map. For example, ‘16E’ for Enhanced or ‘16’ for standard. Other DMX map modes are 16-G1,
16-G3, 16-G12, 8-G1, 8-G3, 8-G12, et al.
•
ADDR
– Displays the current DMX address for the fixture. NOTE: when the fixture does not detect a DMX input signal,
the DMX address text will display in red text.
VL 800 BeamLine
SQU
CURVE
NO
ERRORS
16G1
MAP
001
ADDR
ESC