background image

88-105-7290-00

10

Menu Operation

LCD Display and Menu System

The VL 800 BeamLine luminaire’s LCD Display and Menu System provides local control for accessing the following 

settings:

Address – to set the DMX address

Configure – various parameter settings, set luminaire ID

Fixture – fixture status, recalibrate, reboot, software version, view fixtures hours, etc.

DMX – change the map, set address

Service – password protected factory service menu

Manual – manual control of parameters

Test – test functions of parameters

The menu system is controlled at the Menu Display available at the enclosure input panel. If there are multiple luminaires in 

a system, any settings or changes would need to be made at each LCD Menu as desired.

Menu Controls

The menu system is controlled by an OK (Enter), ESC (Escape), and four arrow (



) buttons. These buttons function 

are shown in 

Figure 6

.

Figure 6:   Menu Control

LCD Display and Menu System Operation

The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes to the menu 

items. When the desired menu item is reached, press the desired Menu Button to display the menu options and to navigate and 

configure the menu options as required.

To navigate and access menu settings/selections:

Step

1. Make sure unit is powered and turned on.

Step

2. Press [ESC] to access menu categories.

Step

3. Use four Arrow (



) buttons to navigate through the various options and settings.

Step

4. Once menu item is reached, press OK [Enter] to access the menu item parameters.

Step

5. Make changes to parameters as desired.

Step

6. Press OK [Enter] button to accept changes.

VL 800 BeamLine

SQU

CURVE

NO

ERRORS

16G1

MAP

001

ADDR

LCD Display

OK (Enter) Button

To Select or Change a 

Setting or Data Value

Escape (ESC)

Used to Access Main Menu Parameters, 

Exit, or Return to Previous Menu Item

Arrow Keys (Up/Down/Left/Right)

Menu Navigation / Data Selection

Displays all Data and
Luminaire Settings

Summary of Contents for BeamLine VL800

















Reviews: