User ManUal
aCClaIM leD Ple WW
13
NOTE:
Not all menu options are available for every fi xture.
DMX MENU
Choose DMX, press the ENTER button to confirm, use the UP/DOWN button to choose from options listed.
ADDRESS
Choose Address, press the ENTER button to confirm. Use the UP/DOWN button to select range of values. Press
the ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to
exit.
DMX MODE
Choose DMX Mode, press the ENTER button to confirm. Use the UP/DOWN button to select mode. Press the
ENTER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit.
DATA
Choose Data, press the ENTER button to confirm. Use the UP/DOWN button to select option. Choose Ch1 –
Intensity xxx(value), Ch2 – Intensity Fine xxx(Value), …. All functions, press the ENTER button to store. Press the
MENU button to return to previous menu or let the unit idle one minute to exit menu mode.
DMX FAIL
To select DMX Fail, press the ENTER button to confirm. Use the UP/DOWN button to select DMX Hold or
Blackout, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
MANUAL MENU
To select Manual, press the ENTER button to confirm, use the UP/DOWN button to select Red, Green, Blue and
Lime. Use the UP/DOWN button to adjust the value from 0 to 255, press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
SETTINGS MENU
Choose Settings, press the ENTER button to confirm, use the UP/DOWN button to choose from options shown
on screen.
LED
Choose LED, press the ENTER button to confirm. Use the UP/DOWN button to select an option. Press the EN-
TER button to store. Press the MENU button to return to previous menu or let the unit idle one minute to exit
menu mode.
DIMMInG CUrVe
To Choose Dimming Curve, press the ENTER button to confirm. Use the UP/DOWN button to Choose Square
Law Curve, S Law Curve or Linear Law Curve, press the ENTER button to store. Press the MENU button to return
to previous menu or let the unit idle one minute to exit menu mode.
DMX OUTPUT
0
255
100
LIGHT OUTPUT
DMX OUTPUT
0
255
100
LIGHT OUTPUT
DMX OUTPUT
0
255
100
LIGHT OUTPUT
LINEAR
S-CURVE
SQUARE LAW
MENU UI STRUCTURE
LEVEL 1 LEVEL 2
LEVEL 3
LEVEL 4 LEVEL 5
LEVEL 6
DEFAULT RDM
ACTIVATION
DESCRIPTION
RESET TO
DEFAULT UI
service
status
(no
errors... or
displays
a list of
errors)
Give list of fi xture errors
Get status
Fixture service area
excluded
Fan
Check
Give fans speeds
Get status
excluded
Temp
Give leD / Fixture temperatures
Get status
excluded
Version
VXXX (MM/DD/YY
Get status
excluded
Fixture
Hours
Gives Fixture run time hours / leD hours
Get status
excluded
Cross
load
are You sure?
send
n/a
excluded