Varec TankGate Interface 8315 Series, Installation & Operation Manual, Page: 62 / 120

8315 L&J Tankway Software Description TankGate Interface
52 Installation and Operations Manual
4.16 System Information (SYS)
The System Information Point lists the hardware and software specifications
of the system. Other information includes the hardware version and any
connected devices.
4.16.1 Parameters
The database parameters used by the SYS point are listed and described below:
Configuration
Parameters
Function
RTUTag RTUTag can contain 15 bytes of data and can include any printable
ASCII character.
DBFile The database file name. DBFile is the name of the RCF database
configuration file
DBVer The database version
PntEnable Disable/Enable execution of points. Default is Enable
Dynamic Parame-
ters
Function
UnitAddr The TankGate Unit Address (SW1)
DBPnts The number of database points defined
DBSize The size of the database in bytes
DBChangeTime The time of last database modification
SysVer The Firmware version
SysCheckSum The System Checksum
HardVer The PCB hardware version
PSDVer The programmable logic version
PntCheckSum CRC-16 Checksum for point's static Configuration Parameters